- Sample Available
- Datasheet Support
- OEM / ODM Ready
K111J Android Vehicle Mounted Computer with Optional M12 I/O plus a 10.1-Inch IP65 700-Nit Display
K111J is an Android Vehicle Mounted Computer for fleet and industrial cabins that require Android 12, MT6789 processing and a 10.1-inch 700-nit display. Its connected build can combine LTE/GNSS with selected M12 networking, serial or CAN channels, while CVBS, NFC, regulator, backup power and brackets are configuration choices.
Key Configuration Highlights
- Product Type: 10.1-inch Android Vehicle Mounted Computer
- System & Processor: Android 12; MediaTek MT6789 octa-core platform
- Memory & Storage: 4GB RAM + 64GB eMMC
- High-Brightness Display: 10.1-inch IPS touchscreen, 1280 × 800 and 700 nits
- Rugged Protection: IP65-rated dust and water protection
- Wireless & Positioning: Dual-band Wi-Fi with AP roaming, Bluetooth 5.2, LTE Cat 4 and GPS/BeiDou/GLONASS
- Vehicle Power: DC 12V input (Optional: 2,000 mAh backup battery; wide-voltage regulator)
- M12 I/O Options: USB 2.0 Type-A (Optional: 100M Ethernet; RS232/RS485; USB; CAN; CVBS; NFC)
Product Sections
Product Detail
Explore the core performance, rugged design, interfaces, power, mounting, and software features of this device.
|
01
MT6789 ANDROID PLATFORM
MT6789 Android 12 Platform for Fleet Applications
K111J uses MediaTek MT6789 with two Cortex-A76 and six Cortex-A55 cores, 4GB RAM and 64GB eMMC. Qualification should cover the Android image, app permissions, radio firmware and selected wired interfaces together.
|
K111J Platform Snapshot
Operating System
Android 12
Processor
MediaTek MT6789: 2×Cortex-A76 2.2GHz + 6×Cortex-A55 2.0GHz
Memory
4GB RAM
Storage
64GB eMMC
Application Fit
A production image matched to the intended software establishes the K111J application baseline. This anchors the mt6789 android 12 platform for fleet applications.
Memory and storage are quoted as discrete K111J configurations rather than blended options; that choice governs MT6789 Android release.
Memory and storage are quoted as discrete K111J configurations rather than blended options; that choice governs MT6789 Android release.
Peripheral Compatibility
Peripheral qualification for K111J should cover the exact serial, CAN, GPIO, network and video devices in the deployment. It also protects the android drivers with the selected m12 i/o set from driver mismatch.
Image version, drivers and hardware choices remain together in the K111J release record for future supply.
Image version, drivers and hardware choices remain together in the K111J release record for future supply.
|
02
10.1-INCH ANDROID DISPLAY
10.1-Inch 700-Nit Workspace for Android Vehicle Apps
The K111J display is a 1280 × 800 IPS panel rated at 700cd/m² with five-point capacitive G+G touch. A future or higher-brightness reference is not treated as an orderable option without explicit quotation confirmation.
Screen Format
10.1-inch IPS, 1280 × 800
Brightness
700cd/m²
Touch Operation
5-point capacitive G+G, 7H
installation planning
Cabin placement for K111J depends on sightline, glare, reach and the selected bracket. The result supports the 10.1-inch 700-nit workspace for android vehicle apps.
01.
Ingress: IP65
02.
Mechanical: No drop height specified
03.
Temperature: Operating -20°C to 60°C; storage -30°C to 70°C
04.
Size: 264.5 × 184.1 × 23mm; 824g
05.
Installation Environment Assessment
|
03
IP65 CLIMATE BOUNDARY
IP65, ESD and Climate Boundaries
The K111J enclosure is rated IP65, with operation specified from -20°C to 60°C and storage from -30°C to 70°C. ESD figures are ±8kV by contact and ±15kV through air, and a humidity ceiling is defined; assess mated connectors and brackets with the vehicle.
Protection Boundary
Ingress protection is limited to the IP65 rating.
Mechanical Scope
No drop height specified
Climate Planning
Operating -20°C to 60°C; storage -30°C to 70°C
The installed K111J assembly depends on sealed cable routing, stable mounting and correctly terminated power wiring; these items remain part of 10.1-inch MT6789 Android M12 terminal.
The installed K111J assembly depends on sealed cable routing, stable mounting and correctly terminated power wiring; these items remain part of 10.1-inch MT6789 Android M12 terminal.
|
04
M12 ANDROID I/O
Android Drivers with the Selected M12 I/O Set
USB 2.0 Type-A and 12V input are available, with optional M12 100M Ethernet, RS232/RS485, USB, CAN or CVBS. LTE Cat 4, GNSS, Wi-Fi and Bluetooth are part of the communication plan; match every optional port to Android software support.
K111J Core Connections
USB / Host
USB 2.0 Type-A
Serial / GPIO
Serial voltage, channel assignment and GPIO mapping should be fixed in the K111J order specification. The mapping belongs to the android drivers with the selected m12 i/o set.
A K111J quotation distinguishes assigned CAN/ACC/analog/trigger channels from functions that are merely available on another configuration.
A network or camera channel is included on K111J only when its cable and port assignment appear in the final BOM.
A network or camera channel is included on K111J only when its cable and port assignment appear in the final BOM. This keeps network or video scope tied to the Android M12 interface set for the 10.1-inch MT6789 Android M12 terminal.
Wireless Package
Dual-band Wi-Fi with AP roaming; Bluetooth 5.2; LTE Cat 4
K111J Interface Map
|
05
12V OR REGULATED POWER
Direct 12V Input or an External Wide-Voltage Regulator
K111J specifies 12V DC, an optional 2000mAh internal battery and an optional external 9–36V regulator module. The purchase specification should define supply, ACC behavior, regulator, hold-up requirement and Android shutdown sequence.
K111J Power Snapshot
Input
12V DC
Battery
Optional built-in 2000mAh battery
Vehicle Protection
Vehicle surge protection remains configuration-specific.
Runtime
Runtime varies with brightness, radios, I/O load and application duty cycle.
K111J Power Decisions
Vehicle Supply Profile
The K111J power assessment should cover startup, cranking and shutdown conditions in the target vehicle. This establishes the supply envelope for direct 12v input or an external wide-voltage regulator.
A K111J electrical drawing links the ACC input to the intended application shutdown behavior within 12V supply and regulator choice.
A K111J electrical drawing links the ACC input to the intended application shutdown behavior within 12V supply and regulator choice.
The K111J power budget is calculated from screen settings, communication modules and the attached M12 peripherals.
The K111J power budget is calculated from screen settings, communication modules and the attached M12 peripherals.
The installer receives one K111J power drawing that resolves connector, fuse, cable length and ground termination.
The installer receives one K111J power drawing that resolves connector, fuse, cable length and ground termination. These details complete the 12V supply and regulator choice for this 10.1-inch MT6789 Android M12 terminal.
|
06
M12 CONNECTOR CLEARANCE
Operator Reach and M12 Connector Clearance
The K111J deployment uses the selected VESA, RAM or deployment bracket while reserving space for the selected M12 and antenna connections. The optional battery and regulator accessible for service should remain consistent.
Cabin Position
Equipment Frame
Service Access
K111J Installation Options
Primary Mount
Optional RAM 38×30mm ball head and VESA 100×100; function adapter cables
Cable Routing
The K111J cable route should avoid compression, rubbing surfaces and heat sources. The route should also preserve the operator reach and m12 connector clearance.
Connector Clearance
Connector clearance for K111J depends on the chosen dock or cable architecture. This clearance supports the operator reach and m12 connector clearance.
The K111J mounting drawing shows a removal path and inspection access instead of treating the unit as permanently trapped.
The K111J mounting drawing shows a removal path and inspection access instead of treating the unit as permanently trapped. That access requirement follows the service pattern of the 10.1-inch MT6789 Android M12 terminal.
Application Scenarios
See how this rugged device supports real-world industrial workflows across different industries.
Android Applications for Fleet and Industrial Vehicles
The 10.1-inch platform supports Android cabin operating tasks whose network, vehicle-bus, video and mounting requirements are established before rollout.
Connected Driver-Workflow Screen
The K111J deployment uses LTE, GNSS and the 10.1-inch interface for dispatch, route and job-status applications.
Forklift Android WMS Screen
Deploy warehouse software with the selected Wi-Fi roaming, Ethernet option and protected mounting arrangement.
Industrial Vehicle Data Panel
The wiring plan should connect defined serial or CAN data to an Android equipment application after driver and pinout qualification.
Optional Camera Status Display
The K111J deployment should use CVBS only with the selected M12 connector, camera format and application behavior documented.
Optional Modules & Accessories
Select optional data capture modules, expansion features, and compatible accessories to match your deployment needs.
Android Image, M12 Ports and Bracket Configuration
K111J can be ordered with different M12 data branches, CAN or CVBS, NFC, a regulator, backup power and mounting components. Record a unique build code so the Android image, antennas, harness and mechanical kit remain synchronized.
Optional
Wi-Fi/GPS/4G antennas
A K111J quotation ties Wi-Fi/GPS/4G antennas to the destination network and the required cable route.
Optional
Optional RAM ball head
A K111J quotation lists Optional RAM ball head with the exact mounting pattern and hardware required by the vehicle.
Optional
Optional VESA 100×100 bracket
A K111J quotation lists Optional VESA 100×100 bracket with the exact mounting pattern and hardware required by the vehicle.
Optional
Optional 9–36V regulator
A K111J order records the input, output and connector details for Optional 9–36V regulator.
Optional
Function adapter cables
A K111J quotation lists Function adapter cables with the exact interface version and quantity required by the installation.
Need help selecting the right modules and accessories?
Tell us your application requirements, and our team will recommend the most suitable options for your deployment.
Technical Specifications
Review key hardware, display, connectivity, power, and environmental specifications for project evaluation.
Procurement-Ready Technical Specifications
Review the key technical specifications of this device, including system performance, display, connectivity, wireless communication, power, and rugged protection, to support project evaluation and procurement decision
1. Core System & Performance
Product Model
K111J
Product Type
Android Vehicle Mounted Computer
Operating System
Android 12
Processor / Chipset
MediaTek MT6789: 2×Cortex-A76 2.2GHz + 6×Cortex-A55 2.0GHz
Memory
4GB RAM
Storage
64GB eMMC
2. Display, Touch & Input
Display Size
10.1-inch IPS
Screen Resolution
1280 × 800
Screen Brightness
700cd/m²
Touch Panel
5-point capacitive G+G, 7H
Input Modes
5-point capacitive G+G, 7H
3. Connectivity, I/O & Vehicle Interfaces
USB / Type-C
USB 2.0 Type-A; 12V DC; optional M12 100M Ethernet, RS232/RS485, USB, CAN or CVBS
Serial / GPIO
USB 2.0 Type-A; 12V DC; optional M12 100M Ethernet, RS232/RS485, USB, CAN or CVBS
LAN / Ethernet
USB 2.0 Type-A; 12V DC; optional M12 100M Ethernet, RS232/RS485, USB, CAN or CVBS
Dock / Pogo Connector
Optional RAM 38×30mm ball head and VESA 100×100; function adapter cables
Industrial / Vehicle Interfaces
USB 2.0 Type-A; 12V DC; optional M12 100M Ethernet, RS232/RS485, USB, CAN or CVBS
4. Wireless, GPS & Data Capture
Wi-Fi / Bluetooth
Dual-band Wi-Fi with AP roaming; Bluetooth 5.2; LTE Cat 4
Cellular Network
Dual-band Wi-Fi with AP roaming; Bluetooth 5.2; LTE Cat 4
GNSS / GPS
GPS / Beidou / GLONASS
RFID / NFC
Optional NXP557 13.56MHz NFC
Camera / Identity Modules
Optional NXP557 13.56MHz NFC
5. Power, Battery & Installation
Battery / Power Source
Optional built-in 2000mAh battery
Power Input
12V DC
Wide Voltage Input
12V DC
Charging / Adapter
12V DC; optional 2000mAh internal battery; optional external 9–36V regulator module
Mounting / Carrying
Optional RAM 38×30mm ball head and VESA 100×100; function adapter cables
6. Rugged, Mechanical & Compliance
IP Rating
IP65
Drop / Shock / Vibration Resistance
No drop height stated
Operating / Storage Temperature
Operating -20°C to 60°C; storage -30°C to 70°C
Dimensions / Weight
264.5 × 184.1 × 23mm; 824g
Need the Full Product Specification Sheet?
Enter your email to receive the latest PDF datasheet for procurement review.
1 PDF Available
- Product Specification Sheet (PDF)
Frequently Asked Questions
Review common questions about configuration, interfaces, deployment, and customization before contacting our sales team.
- PRODUCT FAQ
Answers Before You Request A Quote
Review key questions about configuration, interfaces, mounting options, accessories, and customization before selecting the right rugged tablet for your project.
- 6 Key Questions
- Configuration Review
- Project Support
Need more details? Our team can help confirm the right setup for your project.
What Android hardware platform does K111J use?
Android 12 runs on the K111J MT6789 platform, which combines two Cortex-A76 cores, six Cortex-A55 cores, 4GB of RAM and 64GB eMMC.
Which brightness is published for the K111J screen?
The 10.1-inch 1280 × 800 IPS display is specified at 700cd/m². A higher-brightness configuration requires explicit confirmation.
Which wired options can be selected for K111J?
Optional M12 functions include 100M Ethernet, RS232/RS485, USB, CAN and CVBS. The order should define the exact connector and Android driver support.
How is K111J powered in a vehicle?
The unit specifies 12V DC, with an optional 2000mAh internal battery and an optional 9–36V external regulator module.
What protection and climate limits apply?
K111J publishes IP65 plus its operating, storage, ESD and humidity limits. Those values describe the product envelope and do not replace a completed vehicle-installation test.
Which K111J choices belong in the purchase order?
The purchase record should name the Android image, destination modem, GNSS setup, each M12 function, NFC choice, backup battery, regulator, mounting kit, antennas and cable count.
- KCOSIT PRODUCT SUPPORT
Need Help Choosing the Right Rugged Tablet Configuration?
Share your application scenario, deployment environment, required interfaces, and quantity. Our engineering team will recommend the most suitable rugged tablet configuration for your project.
- Configuration Review
- Interface Support
- Fast RFQ Response
Project support for quantity,modules
and deployment questions